Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

9 Via A. Vanin
Marostica, Veneto, 36063
Italy

+39 0424 1745271

Launch Offer San Luca Frame

 

 

 

 

 

If you're still on the fence about a custom steel bike, read this...

Enjoy € 100 ($ 115) OFF* the new custom steel frame from the only Giro winner in the world that's actually creating bikes - inside an Italian workshop, by Italian craftsmen, from Italian tubing

*Available for a limited time

Dear cyclist friend,

If you only look for bikes that are different, you’re in the right place.

Because in a world where everyone who's got a credit card can become a bike producer, a different bike means a bike that has a story to tell.

And here at Officina Battaglin each new bike we make has a good one.

This time, it's a story that starts more than 45 years ago, in a small village in Northern Italy.

“One day, together with a friend of mine, we went to see a cycling race near San Luca, the small village where we lived.

As we followed the race, which was taking place on a challenging climb, we said to each other ‘well, we can ride just as fast as these riders!’

That winter we enrolled in a team, the Velo Junior Nove, which would be my first team ever.

And after 3 years, we both turned pro”

battaglin maglia rosa.jpg

This story tells the start of Giovanni Battaglin’s legendary cycling career.

After 11 years from that race in San Luca, he won two Grand-Tours in 46 days - a record he still holds - on the monstrous climbs of the Giro and the Vuelta. Then, a few months later, he launched his eponymous bike company and went on to make some of the most successful steel bikes of the 80s.

And this story can go on when you decide to add the chapter of how Giovanni Battaglin designed a custom steel frame for YOU. 

san-luca-steel-frame-officina-battaglin-1.jpg

What makes the Officina Battaglin steel frames so unique?

  • You get a steel frame made for YOU by a Giro and Vuelta winner. In fact, Officina Battaglin is the only producer in the world managed in person by a Grand-Tour winner. And Giovanni Battaglin is deeply involved in the sizing and production process. Actually, he'll be the one looking at your body measurements and designing the best geometry for you.

  • You get a steel frame handmade in Italy. EVERY step of the production process takes place inside Italian workshops, by Italian craftsmen.

  • You'll get photos during the building process, taken inside the workshop. You'll be able to show your friends what Giovanni Battaglin's making for you.

  • You get a lifetime warranty (our unique "One Million Miles" Warranty). The warranty is valid for every new owner until the frame hits 1.000.000 miles.

  • You get a steel frame that is made to order for you. We don't sell off-the-shelf frames.

  • You get a steel frame built entirely from the best steel tubing in the world, Columbus.

  • You get a Certificate of Authenticity signed by Giovanni Battaglin that will make your frame a collectible piece in years to come. 

lanfo-brazing-1.jpg

SAN LUCA

An artisanal steel frame with a clean and essential modern look


The San Luca is built to deliver what you would expect from a steel road frame blending the Italian frame building tradition with modernity: a comfortable ride that doesn’t make you feel beaten up after a long day in the saddle while allowing you to push harder when you want to.
— Giovanni Battaglin


san-luca-steel-frame-officina-battaglin-12.jpg

Columbus Spirit tubing with custom specs

The San Luca frame is built from the oversized Columbus Spirit that makes for a contemporary look. Thanks to a 40-year collaboration, Columbus customized the Spirit tubeset to Giovanni’s specifications. The result was triple-butted Omnicrom tubing that offers significant advantages in terms of weight and strength.

san-luca-steel-frame-officina-battaglin-13.jpg

TIG welded junctions

The San Luca junctions are TIG welded by experienced Italian frame builders. This specific welding technique creates strong bonds between the steel tubes, ensuring the perfect balance between steel’s unrivalled comfort and the reactivity of the frame.

san-luca-steel-frame-officina-battaglin-23.jpg

Carbon monocoque fork

The carbon monocoque fork adds strength and rigidity to the steering, providing reliable and predictable handling that will inspire you to pedal fast in any condition.

san-luca-steel-frame-officina-battaglin-20.jpg

Here's what you get when you take advantage of the € 100 discount on the new San Luca frame

1 - A frame design and bike fit by Giovanni Battaglin to improve your comfort in the saddle

2- San Luca steel frameset, made to order for you in the Officina Battaglin workshop

3- A Certificate of Authenticity hand-signed by Giovanni Battaglin

4- “One Million Miles” Warranty that protects your purchase for a lifetime

Yes, we've got your back for One Million Miles!

We back every steel frame we make with a unique "One Million Miles" Warranty.

Not only is a frame designed to outlive you: ours is a fully transferable warranty, that will be valid for every new owner.

You don't think a handmade product can last that long?

Here are the top 4 reasons your frame will hit (and will pass) one million miles:
 

1- If you’re after a true Italian handmade steel road frame , you’re more than a little concerned about how and where your steel frame will be built. Every single step of our production process takes place in small workshop in Italy. Our craftsmen will be the only people who will manufacture the frames, following a process we know everything about.

2 - We have perfected the techniques over decades. As steel was the best material to make frames, from 1981 to 1996 building more than 250 steel frames was what we did on a daily basis.

3 - Our craftsmen boosted their skills by working for some of the most distintive riders of cycling history such as Giovanni Battaglin and all the Carrera Team’s champions ( Visentini, Roche , Bontempi, Chiappucci , Zimmermann and many others).

4 - There are so many of Battaglin steel frames made in the 80s and the 90s still on the road that we feel confident in saying that the “ second generation “ will be as durable as the first one.

Here's what our customers said about how special were their custom-made steel frames...

Dear Alex,

I just want to thank you from my heart for the Power Plus frameset you recently built for me. It has exceeded my highest expectations!

When I opened the extremely meticulously packed box last Fall, I simply could not believe my eyes. I have had many top brand carbon bikes over the last 20 years, and still own one, but this is the first custom made steel frame bicycle I have had since I started competitive cycling in 1972. After reading the Bicycling Magazine review last year, and then speaking with you Alex on the phone, I knew I had to proceed with my order as I my intuition told me that this bike was something unique and special. I just did not know how special.....It is absolutely amazing!

The custom order paint scheme you and your team created for me is truly a work of art! The bicycle looks fantastic and is so unique, it always turns heads on group rides. I built it up with new Campagnolo Record Gruppo and It looks absolutely beautiful. But more important the ride!....It feels like the classic steel bicycle of the 70’s, but a whole lot faster and lighter, and much more responsive. The Columbus HSS Spirit tubing is so skillfully fillet brazed - together with the modern head tube coupled to the carbon fork, and compact geometry...all making for a modern dream ride - with the retro feel of fine steel. I continue to get out for brisk weekly evening club rides, and have no problem keeping pace with the pack, who are mostly all on their carbon bikes.

This Spring is the start of my first full season with the Power Plus, and so far my carbon road racing bike hangs-up in the garage looking so lonely from not being ridden!

Thank you so much! I will treasure and enjoy this Battaglin bicycle always.
— Dr. Brad Mc Henry, Tampa, FL, USA

This opportunity won't be up for long

The special launch price ends on 15th October, so claim your offer NOW!

The early-bird sale will last

After 15th October

Don't waste a single minute.

All you have to do is filling out the form below.

Registering on this page will ensure we reserve your place on the build list.

Remember that there's no obligation - all you get is the final quote for a San Luca frame, built for you and shipped to your doorstep.

If you say "No, thanks", we'll just go on with the next name.

All frames are awarded on a first come first serve basis.

Fill out the form to claim your offer and receive pricing details

Please fill out the form with your personal details so we can provide you with the final price of the San Luca steel frame.

Just remember to enter the same email address you've used for your subscription.